Icom UR-FR5000/FR6000 module

$2,656.50 inc GST

UR-FR5000 VHF 136-174mhz/UR-FR6000 UHF 403-470mhz, 50 watt, 32 channel IDAS Digital/Analogue repeater module.  

This repeater can be used as a standalone repeater or added to an Icom IC-FR5000/IC-FR6000 repeater to make a 2 channel repeater or trunking system.

  • 50 Watt 50% Duty Cycle Operation
  • In-built IDAS Digital Capability
  • In-built Multiple Tone Signalling (2 Tone, 5 Tone & DTMF)
  • 32 Memory Channels with in-built CTCSS/DTCS Encoder / Decoder, 16 Tones Per Channel for shared Channel / Community Repeater Operation
  • 2 Year Warranty

 

[leap_one_half last=”no” margintop=”” marginbottom=”” animationtype=”” animationspeed=”” animationdelay=”” animationoffset=”” animationiteration=”” ][leap_button align=”center” size=”lg” type=”default-style” link=”/brochures/ICOM%20Repeater%20Brochure.pdf” target=”_blank” class=”” ]Brochure[/leap_button][/leap_one_half][leap_one_half last=”yes” margintop=”” marginbottom=”” animationtype=”” animationspeed=”” animationdelay=”” animationoffset=”” animationiteration=”” ][leap_button align=”center” size=”lg” type=”default-style” link=”/contact” target=”_blank” class=”” ]Contact Us[/leap_button][/leap_one_half]

Clear
SKU: UR-FR5000-UR-FR6000 Category:

Description

STABLE, FLEXIBLE AND HIGH-PERFORMING REPEATER

 

IDAS bridges the gap between analog and digital systems

IDAS is Icom’s digital land mobile radio system using the NXDN™ common air interface. It has useful calling features including selective calling, status message, radio stun/kill/revive and GPS position reporting, etc. The IDAS system is ideal for business and industry users who may want to migrate to a digital system or to the future FCC mandated narrow band spacing.

DOUBLE YOUR CHANNEL CAPACITY

IDAS doubles the capacity of the current 12.5kHz channel allocation. Icom allows you to meet any narrow banding requirements today, and provides a solution to any future spectrum deficiencies.

 

DIGITAL/ANALOGUE MIXED MODE OPERATION

The UR-FR5000/6000 series can receive both Analog and digital signals on a single channel. You can partially introduce the IDAS system, while using the existing Analog radios in a system. The IDAS system allows you to scale migration to narrow band digital at your own pace and need.

 

IMPROVED AUDIO QUALITY

The IDAS system occupies only 6.25kHz spacing per channel. With the improved sensitivity of narrow band communications, increased communication greater than 12.5kHz Analog mode can be achieved. The IDAS system uses the AMBE+2™ codec, which provides clear audio and simultaneous data communication.

NETWORK INTERFACE*

The IDAS repeater has a network interface* and can be connected to a LAN or the Internet via Ethernet cable. Communication range is vastly extended by the Internet connection and eliminates the need for expensive leased lines. When connected to a PC via a LAN or the Internet, you can remotely maintain the repeater configuration remotely from your PC.
* Option (Available in the future)

 

DIGITAL TRUNKING CAPABILITY*

The repeater will also have digital trunking capability in the near future. This will allow you further effective channel management by sharing a minimum of channels with a large number of users.
* Some features are planned and released in the future.

 

SUPERIOR RECEIVER PERFORMANCE

The UR-FR5000/6000 series has class leading receiver performance of selectivity and intermodulation rejection. It improves the quality of the repeater service even under congested band conditions.

BUILT-IN AUDIO COMPANDER*

The built-in audio compander improves the signal to noise ratio and provide clear audio.
*Analog mode only.

 

OTHER FEATURES

  • PTT priority setting (Local Mic., external PTT or repeater operation)
  • Built-in inversion type voice scrambler and optional voice scrambler UT-109R or UT-110R*
  • 5-Tone and DTMF encoder/decoder* and CW ID transmitter
  • Analog wide/narrow (12.5/25kHz) channel spacing programmable*
  • Normal and priority scan
  • Convenient key assign stickers supplied
  • Beat cancel capability
  • Low voltage alert*
  • Quick and easy programming from a PC
    * For Analog mode only

Additional information

Frequency Band

UHF – High Band (450-512MHz), UHF – Low Band (400-470MHz), VHF – All Band (136-174MHz)

You may also like…