Victron SmartSolar MPPT Charge Controller
$340.40 inc GST
The Victron SmartSolar MPPT is a solar charge controller with built-in Bluetooth for charging 12 V and 24 V batteries (48 V on the 100/20). Use it to keep a remote repeater, camera or monitoring site powered from solar, or to charge a battery in a trailer, vehicle or hut.
- Four models from 10 A to 20 A charge current
- Ultra-fast MPPT, up to 98% efficient
- Bluetooth set-up and monitoring with the free VictronConnect app
- Load output with low-voltage disconnect to protect the battery
- Programmable for lead-acid and lithium batteries
- 5-year Victron warranty
Solar power for remote radio sites
A repeater on a hilltop or a camera on a remote site needs power that looks after itself. The SmartSolar MPPT gets the most out of the solar panel and keeps the battery charged properly, so the site stays on air without a visit. Its ultra-fast maximum power point tracking adjusts continuously to changing light, and in partly cloudy conditions it can harvest up to 30% more energy than a PWM controller and up to 10% more than slower MPPT controllers.
Pair it with a deep cycle battery such as the Century C12-120XDA to power one of our radio repeaters, a PoC base, a router or a site camera.
Set up and monitor from your phone
Bluetooth is built in, so you can set up, monitor and update the controller from your phone with the free VictronConnect app, with no extra hardware. It stores 46 days of history covering battery voltage, charge current, PV voltage and load current, which makes fault-finding on a remote site much quicker. The VE.Direct port connects to a Victron GX device for remote monitoring through the VRM portal.
Charging and battery protection
- Multi-stage adaptive charging, preset for lead-acid and fully programmable for lithium
- Default absorption 14.4 V / 28.8 V, float 13.8 V / 27.6 V (adjustable)
- Internal temperature sensor adjusts the charge voltage automatically
- Load output switches off connected equipment at a preset low battery voltage, or uses the BatteryLife algorithm
- Recovers fully discharged batteries, including lithium batteries with an internal disconnect
- Battery voltage and temperature from a Smart Battery Sense or BMV-712 over Bluetooth
Not sure which model you need? Talk to us with your panel size and battery voltage and we will match the controller to the site.
Download SmartSolar MPPT spec sheet (PDF)
Models
| Model | Battery | Max PV voltage | Charge current | Nominal PV power (12 / 24 / 48 V) | Max load current |
|---|---|---|---|---|---|
| MPPT 75/10 | 12/24 V | 75 V | 10 A | 145 W / 290 W / – | 15 A |
| MPPT 75/15 | 12/24 V | 75 V | 15 A | 220 W / 440 W / – | 15 A |
| MPPT 100/15 | 12/24 V | 100 V | 15 A | 220 W / 440 W / – | 15 A |
| MPPT 100/20-48V | 12/24/48 V | 100 V | 20 A | 290 W / 580 W / 1160 W | 20 A (1 A at 48 V) |
Specifications
| Codes | SCC075010060R, SCC075015060R, SCC110015060R, SCC110020160R |
| Peak efficiency | 98% |
| Charge algorithm | Multi-stage adaptive, programmable |
| Temperature compensation | −16 mV/°C (12 V), −32 mV/°C (24 V) |
| Communication | Bluetooth Smart, VE.Direct |
| Protection | Output short circuit, over-temperature |
| Operating temperature | −30 to +60 °C (full output to 40 °C) |
| Terminals | 6 mm² / AWG10 |
| Enclosure | IP43 electronics, IP22 connection area |
| Standards | EN/IEC 62109-1, UL 1741, CSA C22.2 |
| Warranty | 5 years, conditions apply |
Ordering
Choose your model and add to cart, or contact us for complete solar site power systems and larger quantities. Prices include GST.
Additional information
| Model | MPPT 75/10, MPPT 75/15, MPPT 100/15, MPPT 100/20-48V |
|---|




