Broadband Shrouded Yagi

$129.15 inc GST

The ANT-252 is a broadband directional antenna in a weatherproof white shroud. One antenna covers 698–960 MHz, 1710–2700 MHz and 3300–3800 MHz at 9 dBi, so it suits 4G and 5G routers, boosters and fixed-site links on any NZ network.

  • Covers low band, mid band and 3.5 GHz 5G
  • 9 ± 1 dBi gain, vertical polarisation
  • Log-periodic elements in a UV-stable radome
  • N female connector on pigtail, 50 W maximum
  • Mast mount 25–50 mm, U-bolt bracket included
  • Cable leads made to your length and connector

One antenna for every cellular band

Most yagis are cut for a single band. That works until the network moves your site to a different one, or you need the 3.5 GHz 5G layer as well as 4G. The ANT-252 covers 698–960 MHz, 1710–2700 MHz and 3300–3800 MHz from one N connector, with 9 dBi of gain across all three ranges. It works as a donor antenna for a cellular router or booster, or as a link antenna at a fixed site.

The elements are a log-periodic design, sealed inside a UV-stable white shroud. There are no exposed elements to bend or ice up, and the compact 512 mm body is easy to mount on a house, shed, mast or pole.

If you only need one band and want more gain, see our Hi-Tec Aerials narrow band cell yagis.

Mounting and aiming

Clamp the antenna to a 25–50 mm mast with the supplied bracket and U-bolt. Mount it with the small drain hole facing down, and point the narrow end toward the cell tower you want to use. The horizontal beamwidth of 75–85° is forgiving, but a few degrees either way can still make a difference at the edge of coverage, so check signal readings on the router as you adjust.

Cable leads made to length

The antenna has an N female connector on a short pigtail. We make up cable leads to suit your install, so you get the right length and the right connector at the router end without adaptors. When you order, tell us:

  • The cable length you need, from the antenna to the router or booster
  • The cable type, or let us recommend one. Longer runs need low-loss cable to keep the gain you are paying for
  • The connector your device uses, for example SMA, TS9, CRC9, FME or N

Add the details in the order notes at checkout, or contact us and we will quote the lead with the antenna.

Download ANT-252 spec sheet (PDF)

Specifications

CodeANT-252
Frequency range698–960 MHz, 1710–2700 MHz, 3300–3800 MHz
Gain9 ± 1 dBi
Horizontal beamwidth85° / 80° / 75° (±15°) low / mid / high band
Vertical beamwidth60° / 65° / 60° typical
PolarisationVertical
Front-to-back ratio≥ 15 dB
VSWR≤ 1.5
Impedance50 Ω
IntermodulationIM3 ≤ −140 dBc (2 × 33 dBm)
Maximum power50 W
ConnectorN female on pigtail
RadomeUV-stable HIPS, white
Dimensions512 × 210 × 64 mm (H × W × D)
Weight1 kg including bracket
Mounting25–50 mm mast, U-bolt bracket supplied
Operating temperature−40 to +60 °C

Ordering

Add to cart and put your cable lead requirements in the order notes, or contact us for a quote on the antenna and lead together. Prices include GST.