GME On-Glass UHF CB Antenna
Price range: $147.00 through $199.00 inc GST
GME on-glass UHF CB antennas mount on the vehicle’s glass with no drilling, no bull bar and no ground plane needed. The AE5002 has a slim external whip that couples through the glass, while the transparent AE5003 and AE5004 mount inside the windscreen for a covert install with no wind noise and nothing to steal. All are pre-tuned to 477 MHz and Australian made. Signals is an authorised GME dealer.
- No-drill on-glass mounting
- Ground independent, pre-tuned to 477 MHz
- AE5002: external whip with under-glass coupling box, 2.1 dBi
- AE5003: transparent strip, inside the glass, 2.5 dBi
- AE5004: transparent panel, inside the glass, 4.5 dBi
- Pre-terminated FME connector
UHF CB without drilling the vehicle
On-glass antennas are the tidy choice for company cars, leased and hire vehicles, and anyone who doesn't want holes in the roof or a bull bar mount. GME's on-glass range is pre-tuned to 477 MHz and ground independent, so there's no tuning and no ground plane to worry about.
The AE5002 uses an under-glass coupling box bonded inside the window and a slim spring steel whip bonded outside, directly over it. The signal passes through the glass, and the whip unscrews for the car wash. The AE5003 and AE5004 are transparent antennas that mount on the inside of the windscreen, so they're almost invisible from outside, can't be stolen or vandalised, and create no wind noise. They're ideal where a covert or unobtrusive install is needed.
Which one?
| Model | Type | Gain | Size | In the box |
|---|---|---|---|---|
| AE5002 | External whip, under-glass coupler | 2.1 dBi | 180 mm whip | Whip, coupling box, RG58 lead with FME, FME to PL259 adaptor, window cleaner, Allen key |
| AE5003 | Transparent strip, inside glass | 2.5 dBi | 265 × 20 mm | Antenna, 3 m low-loss coax with FME, 1 m RG174 with FME, instructions |
| AE5004 | Transparent panel, inside glass | 4.5 dBi | 271 × 165 mm | Antenna, 3 m low-loss coax with FME, 1 m RG174 with FME, instructions |
Installation tips
- Mount high and centred on the front or rear glass, at least 14 cm from metal edges.
- Keep clear of heater, demister and embedded antenna wires, and avoid heavily curved glass.
- On the windscreen, keep out of the driver's view and the wiper sweep.
- Metallised aftermarket tint can reduce performance. For the AE5002, GME recommends removing a 40 × 40 mm patch of tint at the mounting point.
- Apply between 20°C and 40°C and allow the adhesive to cure before use (AE5002: 24 hours, up to 48 hours below 15°C).
For a bull bar or bracket install, see the GME flexible ground independent antenna. Pair it with a GME UHF CB radio such as the TX3100, compact TX3350 / TX3500S range or TX4500S DIN mount.
Download AE5002 instruction manual (PDF)
Specifications
| Frequency | 477 MHz UHF CB, pre-tuned |
| Gain | AE5002 2.1 dBi; AE5003 2.5 dBi; AE5004 4.5 dBi |
| Grounding | Ground independent |
| Mounting | On-glass, adhesive |
| Connector | Pre-terminated FME |
| AE5002 details | 50 Ω, 30 W, spring steel whip, die-cast aluminium coupling box, 3M adhesive, RG58 cable |
| Origin | Made in Australia |
| Warranty | 1 year |
Ordering
Select the model and add to cart, or contact us for fitting or fleet quantities. Prices include GST. Signals is an authorised GME dealer.
Additional information
| Brand | GME |
|---|---|
| Band | CB |
| Model | AE5003 Transparent strip, 2.5 dBi, AE5002 External whip, 2.1 dBi, AE5004 Transparent panel, 4.5 dBi |
| Mounting | On-glass, no drilling |
| Grounding | Ground independent |





